Quick Overview Of Core Parameters
Probe Diameter: 8 mm
Thread Specification: M10 × 1
Unthreaded Length: 0 mm
Overall Case Length: 180 mm
Integrated Cable: 0.5 m (Standard coaxial, unarmored)
Linear Range: 2.0 mm (80 mils)
Scale Factor: 7.87 V/mm (200 mV/mil)
Operating Temperature: -51 °C to +177 °C
Agency Approvals: Multiple Ex approvals (CSA/ATEX/IECEx)
If you want to more details about BENTLY NEVADA 3300 XL 8 mm Proximity Probe，please contact me without hesitation.Email：sales@sparecenter.com
Trust Spare Center
Massive Stock: Large regional inventory of rare and current industrial automation parts.
Global Shipping: Same-day dispatch via major couriers (DHL, FedEx, UPS).
Guaranteed Quality: 100% genuine products backed by full testing and warranty.
Technical Support: Multilingual product support for seamless cross-border ordering.
Premium Brands: Authorized supply for major lines like Bently Nevada and ABB.
Multimeter Quick Test Of BENTLY NEVADA 3300 XL 8 mm Proximity Probe
Unplug the 330103-00-18-05-02-05 and measure center pin to outer jacket:
6.95 to 7.95 ohms: Normal at 20°C (factory spec: 7.45 ± 0.50 Ω). May reach 10.0 ohms if hot.
Infinity (Open): Internal coil or wire broken. Replace probe.
Under 4.0 ohms: Short circuit. Usually caused by oil or water in the connector. Clean and dry.
Jacket to Machine Ground: Must be Open (Infinity). Any continuity causes a noisy ground loop.
BENTLY NEVADA 3300 XL 8 mm Proximity Probe FAQ
Q1: Loop matching options for p/n 330103-00-18-05-02-05 BENTLY NEVADA?
A: 330103-00-18-05-02-05 BENTLY NEVADA has a 0.5m pigtail. For a 5m setup, patch it to a 4.5m extension cable. For a 9m setup, use an 8.5m cable. Never mismatch total electrical length or calibration shifts.
Q2: Will 330103-00-18-05-02-05 BENTLY NEVADA work with old non-XL 3300 racks?
A: Yes, it fits physically and electrically. Just note that tying the 330103-00-18-05-02-05 BENTLY NEVADA to legacy hardware drops the whole loop performance down to old specs.
Q3: Mounting clearance to avoid cross-talk on Bently Nevada 330103-00-18-05-02-05?
A: Keep a 15mm counterbore clearance around the 180mm threaded body. If the Bently Nevada 330103-00-18-05-02-05 is too close to surrounding metal, side-view interference will corrupt your gap voltage.
Q4: Best way to lock down the Bently Nevada 330103-00-18-05-02-05 coaxial joint in wet/oily sumps?
A: Wrap the 330103-00-18-05-02-05 ClickLoc connector with self-fusing tape or slip on a boots protector. Oil ingress here directly triggers intermittent opens and false machine trips.
Q5: What if the target shaft isn't the standard material for Bently Nevada 330103-00-18-05-02-05?
A: The 330103-00-18-05-02-05 assumes an AISI 4140 target. Running it against stainless steel or chrome finishes skews the 200 mV/mil scale factor, so you will need a re-calibrated Proximitor.
Other Modules
| 3500/32M 149986-02 | 330130-040-00-00 |
| 1900/65A 172323-01 | 330130-040-01-00 |
| 330180-X0-05 | 330180-91-05 |
| 125720-01 | 3500/20 |
| 125760-01 | 3500/45 176449-04 |
| 125768-01 | 3500/60 |
| 128229-01 | 3500/64M |
| 128240-01 | 330103-00-06-10-02-00 |
| 133396-01 | 330106-05-30-10-02-00 |
| 146031-01 | 133442-01 |
| 330103-00-04-10-02-00 | 330180-90-00 |
| 330104-00-06-05-02-00 | 125840-01 |
| 330105-02-12-05-02-00 | 125800-01 |
| 330106-05-30-05-02-00 | 330105-02-12-05-02-05 |
| 330106-05-30-10-02-05 | 330130-080-00-CN |
Email: sales@sparecenter.com
